pressed flowers color mask card

pressed flowers color mask card

Sometimes you just need a pretty and simple birthday card and the summer is prime birthday season for my BIG family – so I need lots of cards! This card fits the bill all around – fast and easy but stunning in it’s simplicity!

Welcome to the new Pressed Flowers embossing folder (#165614) is part of the new Online Exclusives Floral Impressions Suite. It is a regular embossing folder and so sweet and simple.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4 1/4″ x 51/2″ piece,
4″ x 5 1/4″ and 2 scraps for die cuts

That’s it! I told you this one was simple!

Take the Basic White layer and run it through the Stampin’ Cut and Emboss machine using the base plate #1 and sandwich the folder between two cutting plates #3’s and run through!

Take a Basic White scrap and cut one small butterfly die from the Beautiful Butterflies die set and the long thin banner die from the Stylish Shapes die set.

Color the butterfly using Petunia Pop ink and a blending brush.

Take the 4 1/4″ x 5 1/2″ quarter sheet of cardstock and die cut the fourth from the smallest rectangular die from the Textured Notes die set (save the die for another use).
We will be using the negative space created by the die cut.

Place the negative die cut directly on the embossed layer and color with a blending brush and Coastal Cabana ink on the top right hand corner inside the negative space.

Color the lower half diagonally from the top left corner to the bottom two corners with Petunia Pop ink and a blending brush slightly overlapping the Petunia Pop over the previously colored Coastal Cabana.
Remove the negative die space mask from the embossed layer.
Tie and knot a length of Petunia Pop ribbon around the embossed layer.
Adhere the ribbon embossed layer onto the card front with even borders.
Pop up the small butterfly die onto the upper right edge of the colored area.
Stamp the Happy Birthday sentiment image in Petunia Pop ink onto the Stylish Shapes banner die.

Lightly color the banner with the Petunia Pop blending brush without re-inking it so you get a subtler color on the sentiment piece.

Pop up on Mini Stampin’ Dimensionals and place on the lower portion of the card slightly above the ribbon.

Place three coordinating 2024-2026 In Color Flat Pearls to the card to finish this easy birthday card! Now time to mail it off!

It’s your turn to make a cute and easy birthday card – try your hand at this negative space masking technique with things you have in your stash! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #108 – beautiful butterflies

card sketch #108 – beautiful butterflies

Today is another card sketch to get your creative juices flowing! Card Sketch #108 – let’s see what you cane create with this sketch!

This card uses the Beautiful Bokeh Suite with the gorgeous Beautiful Butterflies bundle and the Pastel Ombre Glimmer paper which creates a beautiful sparkling butterfly!

Measurements:
BASE: Fresh Freesia CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for the large butterfly detailed die
Beautiful Bokeh DSP: 2″ x 5 1/4″
Basic White CS: 2″ x 5 1/4″
scrap for the Stylish Shapes banner die
Pastel Ombre Glimmer paper: scrap for the
solid butterfly die and the butterfly body

Emboss the Basic White 2″ layer with the Beautiful Butterflies hybrid embossing folder.
Adhere the 2″ DSP layer to the left-hand side of the card front.
Die cut the detailed large butterfly die in Fresh Freesia CS.
Die cut the butterfly body and the solid butterfly die from the Pastel Ombre Glimmer paper.
Adhere the butterfly pieces together – solid piece on the bottom, detailed butterfly piece over that and then the glimmer body over both.
Adhere the Basic White embossed layer to the right-hand side of the card front.
Pop up the butterfly on Stampin’ Dimensionals and adhere to the center of the card front.
Stamp the Happy Birthday sentiment from the Beautiful Butterflies stamp set in Highland Heather ink and blend the background with a Blending Brush and Highland Heather ink.
Adhere the sentiment in the lower right-hand corner on Stampin’ Dimensionals.
Adhere the Holographic Resin Dots tot he card front to add a little sparkle to finish off this easy sketch card!
I hate to waste any of the pretty Glimmer Paper so I cut out some of the smaller butterfly die cuts and added one to the card at the end!

What do you think? Try this sketch and let me know what you came up with!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – pumpkin pie, petal pink and balmy blue

more color mondays – pumpkin pie, petal pink and balmy blue

Today’s More Color Mondays color challenge takes it’s cue from the gorgeous Everyday Skies 6″ x 6″ DSP. The sheet on the front of this card is covered in fluffy clouds of Petal pink and light Pumpkin Pie set against a Balmy Blue sky. A perfect summer sky for a summery fun fold card! This card is called a Pop Out Swing Fun Fold and i will show you how easy it is to make!
Follow along and make one of your own!

Measurements:
BASE 1: Balmy Blue CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
BASE 2: Balmy Blue CS: 5 1/2″ x 8″
scored at 2″, 4″ and 6″
DSP: BASE 1 outside layer: 4″ x 5 1/4″
BASE 2 inside layers: (3) 1 3/4″ x 5 1/4″
Basic White CS: 1 3/4″ x 5 1/4″
Pumpkin Pie CS: scraps for butterfly dies
Petal Pink CS: scraps for butterfly dies

Score BASE 1 at 4 1/4″ and BASE 2 at 2″, 4″, and 6″.

Adhere the 4″ x 5 1/4″ Everyday Skies DSP layer to the Balmy Blue BASE 1 card front.

Flip BASE 1 over and adhere one of the Beautiful Bokeh DSP strips to the left-hand edge of the backside.
Die cut the large base butterfly image from the Beautiful Butterflies bundle out of the card front – cutting through both layers on the front and the DSP on the back side.
On BASE 2, place the 5 1/2″ side of the paper at the top edge of the Stampin’ Trimmer, cut at 3/4″ down to the 2″ score line on each side of the paper. Then cut along the 2″ score line in between the cut lines. This will leave two tabs on the top and bottom of this BASE piece.
Adhere the other two 1 3/4″ x 5 1/4″ Beautiful Bokeh DSP pieces to the second and thrid panels of BASE 2.
Stamp and decorate the Basic White 1 3/4″ layer and adhere to the last panel of BASE 2.
Place Multipurpose liquid glue to the back side of panel 4 and adhere to the right-hand edge of BASE 1 making sure that the outside edges align.
Fold in between panels 2 and 3 and apply liquid glue to the tabs.

Clos ethe card front over the tabs and adhere to the back of the BASE 1 card front. If you lie the BASE 2 flat and bring the BASE 1 card front over it this will ensure that the card will close well after adhering.

With the card closed, apply liquid glue to the inside right panel, the part that is visible through the butterfly die cut out space.
Die cut the butterfly base in Pumpkin Pie CS.
Die cut the butterfly detail die in Petal Pink CS.
Adhere the detailed die to the base with Liquid Glue.
Adhere the completed butterfly die to the right-hand edge that has glue on it – laying the butterfly into the original die negative space.
Once dry this will allow the butterfly to “swing” as the mechanism opens and closes with the card!
I added two smaller butterflies to the inside of the card and Holographic Resin Dots to the outside of the card to finish it off with a llittle sparkle!

You can cut out the front of the card wish any shape! Try a die that you have on hand and see what artwork you can create – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – daffodil delight, coastal cabana and melon mambo

more color mondays – daffodil delight, coastal cabana and melon mambo

Welcome to More Color Mondays – today’s color challenge uses a triadic color combination from our Color Coach tool. This color wheel is actually two interconnected spinning circles that contain all of Stampin’ Up!’s basic colors on the outer wheel and an inner white circle with cut out sections that reveal different color theory color combinations!
We have four different color theory combinations available on this Color Coach Wheel:
Monochromatic, Analogous, Complementary and Triadic.
Today’s combination of Daffodil Delight, Coastal Cabana and Melon mambo is a triadic color combination forming a triangular position on the wheel.

Measurements:
Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″ layer
Daffodil Delight CS: strip scrap
Coastal Cabana CS: strip scrap
Melon Mambo CS: strip scrap

Place the large butterfly die from the Beautiful Butterflies bundle and die cut in the center of the 4″ x 5 1/4″ Basic White layer – saving both the negative and positive images.
Place the negative die cut layer and emboss it in the Dotted Circles 3D embossing folder.
On the front of the Basic White card base, brush with Blending Brushes a layer of Daffodil Delight ink on the top about an inch in from the top, then a layer of Coastal Cabana then a layer of Melon Mambo about an inch from the bottom. Place the negative space layer on top of the card base before you start to gauge the area that you will want to color and the areas you want to leave white. We only want to color the area that will be seen through the butterfly opening.
Adhere the embossed negative die layer on the card base leaving an even border around the edges of the card front.
Adhere the butterfly detail die that came from the center of the original layer and adhere with in the borders of the negative die space.
I used strip scraps of Melon mambo and Daffodil delight and adhered these strips below the die.
Stamp a sentiment onto a Coastal Cabana strip and pop up the strip on the card over the bottom of the dies and above the other colored strips.
Adhere some embellishments around the sentiment and this lovely triadic color card is complete!

Our Color Wheel is a MUST HAVE – making color combinations a snap! Try some color combinations from the color wheel on page 136 in the new catalog or better yet order your own color wheel today!

Now go and create some great color combinations for your own artwork – one stamp at a time!

Happy Stampin’
Natalie

beautiful butterflies shaker card

beautiful butterflies shaker card

Today’s blog post is a shaker card with the Beautiful Butterflies bundle: for butterfly lovers like me this is an awesome bundle with a hybrid embossing folder and gorgeous coordinating stamp and die sets.

I had some watercolor paper left over from my March 22nd OnStage swap cards and I used the last of those papers for this special card that I mailed to a friend of mine for her birthday!

Measurements:
BASE: Lemon Lime Twist CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic Black CS: 4″ x 5 1/4″ embossed and cut
Window Sheet 3 1/2″ x 5″
Fluid 100 paper

Emboss the Basic Black layer with the Beautiful Butterflies folder and cut a 1″ border frame with the Stampin’ Trimmer.
Save the inside rectangle for the inside of the card.
Place Tear-n-Tape around the backside perimeter of the frame cut out.
Adhere the window sheet to the inside of the Basic Black layer.
Place foam adhesive strips around the backside opening of the rectangular opening.
Place a pile of Itty Bitty Bokeh Mix in the center of the Lemon Lime card base.
Remove the release paper off the foam strips and adhere the Basic Black frame to the card front so there is an even border the whole way around the card.
Adhere the large butterfly that we die cut out of the watercolored Fluid 100 paper to the lower right hand side of the frame.
Stamp the sentiment onto remaining Fluid 100 paper and die cut with the sentiment strip die and adhere above the rectangular opening .
Place glue dots on the card front to adhere additional Itty Bitty Bokeh sequins to the card front to decorate!
Adhere a Basic White 4″ x 5 1/4″ layer to the inside of the card.
Stamp a smaller butterfly in Tuxedo Black Memento ink at the top and adhere the rectangular frame cut to the lower right hand side of that layer and the inside has some fun interest!
Shake to your hearts content what a fun interactive card!
Try making a shaker card as your next project – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie